Color › Cardinal Red
Starting at $5,099.00 USD
The Jazzy® 600 ES features patented Mid-wheel 6® technology and Active-Trac® ATX Suspension for an extraordinary level of performance, maneuverability and the tightest turning radius in the Jazzy line.
Mid-wheel 6 technology incorporates ATX Suspension for extra stability with independent front casters that raise and lower as needed to compensate instantly for changes in terrain and ease of transitions.
The Jazzy 600 ES offers true all-around performance indoors and out, transitions curbs smoothly and is rated for climbing and aggressive performance, making it an excellent power chair choice.
Spherical caster shrouding design to prevent hang-ups when climbing
Enhances comfort and performance
Exceptional traction on varied surfaces
Freewheel levers are easily accessed for caregiver assistance
Jazzy 600 ES
|Weight Capacity||300 lbs.|
|Maximum Speed3||Up to 4 mph|
|Front Wheels||6" solid OMNI-Casters|
|Rear Wheels||6" solid OMNI-Casters|
|Drivetrain||Two-motor, mid-wheel drive|
|Braking System||Regenerative and electro-mechanical|
|Suspension Type||Active-Trac® (ATX)|
|High-Back Seat (max. size)||20"W x 20"D|
|High-Back Seat-to-Floor Range||21" - 24"|
|Synergy® Seating||20"W x 20"D|
|Synergy® Seat-to-Floor Range||17.25" - 19.25"|
|Standard Electronics||50A, Dynamic Shark|
|Battery Size (2 required)||12 volt, NF-22|
|Standard Battery Charger||5A, off-board|
|Per-Charge Range3,6||Up to 17 miles|
|Battery Weight5||37 lbs. each|
|Weight of Heaviest Piece4||124 lbs.|
|Standard Seat Weight||52 lbs. (high-back)|
|Standard Seat Size||18" x 18"-20" / 20" x 18"-20"|
|Medicare Code Coverage||Group 2: Standard (K0822/K0823)|
|Warranty||Lifetime limited warranty on frame;
13-month limited warranty on electronics;
13-month limited warranty on drive motors
1 Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of + or - 3 %. Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections.
2 Without front riggings.
3 Varies with user weight, terrain, battery type, battery condition and tire pressure.
4 Does not include seat or battery weights.
5 Battery weight may vary based on manufacturer.
6 Tested in accordance with ANSI/RESNA, WC Vol. 2, Section 4 and ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Testing conducted at maximum weight capacities. This specification can be subject to a variance of +10%, -5%.
Your Pride product has undergone thorough product testing to ensure safety, durability and performance.
Our power chairs, scooters and lift chairs are Food & Drug Administration (FDA) approved medical products that require specific testing prior to release for public use.
The testing requirements accepted by the FDA were developed by the American National Standards Institute/Rehabilitation Engineering & Assistive Technology Society of North America (ANSI/RESNA).
The tests are conducted in accordance with the requirements of the ANSI/RESNA Test Standards and complement an additional stringent testing regiment developed by Pride's Research & Development Team.
All products have passed, and in many cases, exceeded test criteria set forth, assuring the high level of quality synonymous with Pride.
Some of the items our testing criteria include are: