The Outlander LP Exterior Lift Series is comprised of low-profile lifts designed to take your 10” or 14” mid-wheel drive power chairs with you.
Low-profile lifts provide increased visibility while the lift is in-use or in the stowed position. The design also provides a shock-absorbing “cradle effect” which protects your power chair while the vehicle is in motion.
This is a great exterior lift option for sedans, SUVs, mini-vans, full-size vans and pick-up trucks.
Simple, hitch-based installation requires little to no modification of your vehicle and allows for easy removal.
Outlander LP Exterior Lift
|Base Weight1||76 lbs for 10" Wheels|
75 lbs. for 14" Wheels
|Maximum Mobility Product Overall Weight2||350 lbs.|
|Maximum Mobility Product Width||27"|
|Overall Platform Length||19"|
|Maximum Travel Distance From the Ground||20"|
|Motor||Sealed 12 volt DC|
|Hitch Class3||Class II, III & IV|
Battery pack w/charger
|Vehicle Platform||Full-size van, Mini-van, Truck, Sedan, SUV and Crossover|
1 Does not include any accessories or hardware.
2 Lifting weight does not include accessories or certain upgraded seating. Please contact Customer Service for greater detail.
3 Hitch weight carrying capacity varies by vehicle. Call for details.
The newly redesigned Swing-Away Adaptor allows the Outlander Exterior Lift to effortlessly pivot away from a vehicle for even easier access to trunks, cargo spaces, lift gates or tailgates.
*Tested under ideal conditions using 325 lb. Scooter. Cycles per charge may vary depending on various factors such as scooter or power chair weight and climate.
NOTE: When used on an outside lift system, the weather covers must be secured not only with the drawstring, but also with a heavy gauge nylon cord threaded through the grommets and secured to the mobilitydevice. The drawstring closure should only be used by itself during stationary storage, such as on a porch or in a garage.
DISCLAIMER: Not all accessories are available for all products. Please speak with your Provider for details and availability.
Your Pride product has undergone thorough product testing to ensure safety, durability and performance.
Our power chairs, scooters and lift chairs are Food & Drug Administration (FDA) approved medical products that require specific testing prior to release for public use.
The testing requirements accepted by the FDA were developed by the American National Standards Institute/Rehabilitation Engineering & Assistive Technology Society of North America (ANSI/RESNA).
The tests are conducted in accordance with the requirements of the ANSI/RESNA Test Standards and complement an additional stringent testing regiment developed by Pride's Research & Development Team.
All products have passed, and in many cases, exceeded test criteria set forth, assuring the high level of quality synonymous with Pride.
Some of the items our testing criteria include are: