Get out there in style with the Go Chair.
The Go Chair offers a bold style available in an array of contemporary colors.
Enhanced performance and comfort, along with feather-touch disassembly, allows you to enjoy lightweight travel and independence on the go.
With a weight capacity of 300 lbs. and a sleek, bold look, the Go Chair makes travel easy.
18”x17”, 5 point swivel seat with height and width adjustable armrest
Dual swing-away, under seat storage for added convenience
Simple frame separation with only one hand easily disassembles into five super-lightweight pieces for convenient transport and storage
Large footplate for comfortability
|Weight Capacity||300 lbs.|
|Length1,2||28.5" without front rigging
33" with front rigging
|Maximum Speed3||up to 3.7 mph|
|Ground Clearance1||1.8" at motor, 1.7" at anti-tip, 2.7" at foot bracket|
|Front Wheels||6" solid casters|
|Drive Wheels||9" solid|
|Rear Wheels||3" solid anti-tips|
|Standard Electronics||40 amp, PG GC3 (non-programmable)|
|Battery Size (2 required)||18 Ah, 12 V, deep-cycle|
|Standard Battery Charger||Off-board, 2 amp|
|Per-Charge Range3,6||Up to 8.7 miles (std), 10.9 miles with extended range|
|Battery Weight5||14 lbs. each|
|Weight of Heaviest Piece4||36 lbs. (rear)|
|Standard Seat Weight||30 lbs.|
|Standard Seat Size||Compact, Foldable (18"x17")|
|Medicare Code Coverage||K0899 Power Mobility Device, not coded by DME PDAC or does not meet criteria|
|Warranty||5-year limited on frame;
13-month limited on electronics;
13-month limited on drive motors
1 Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of + or - 3 %. Dimensions listed are for power base only. Overall measurements will vary based on seating and accessory selections.
2 Without front riggings.
3 Varies with user weight, terrain, battery type, battery condition and tire pressure.
4 Does not include seat or battery weights.
5 Battery weight may vary based on manufacturer.
6 Tested in accordance with ANSI/RESNA, WC Vol. 2, Section 4 and ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Testing conducted at maximum weight capacities. This specification can be subject to a variance of +10%, -5%.
Your Pride product has undergone thorough product testing to ensure safety, durability and performance.
Our power chairs, scooters and lift chairs are Food & Drug Administration (FDA) approved medical products that require specific testing prior to release for public use.
The testing requirements accepted by the FDA were developed by the American National Standards Institute/Rehabilitation Engineering & Assistive Technology Society of North America (ANSI/RESNA).
The tests are conducted in accordance with the requirements of the ANSI/RESNA Test Standards and complement an additional stringent testing regiment developed by Pride's Research & Development Team.
All products have passed, and in many cases, exceeded test criteria set forth, assuring the high level of quality synonymous with Pride.
Some of the items our testing criteria include are: