The Outlander Full Platform Exterior Lift for scooters and power chairs is the most universal platform lift available.
The simple hitch-based installation requires little to no modification to your vehicle and allows for easy removal.
The easy drive-on/drive-off platform enables loading from either end of the lift and takes the hassle out of loading your mobility device in a busy parking area.
Consumers have the choice of a one-hand retractable strap kit, scooter lock-down arm or power chair hold-down bar.
Outlander Exterior Lift
|Base Weight1||82 lbs.|
|Maximum Mobility Product Overall Weight2||350 lbs.|
|Maximum Mobility Product Width||28"|
|Overall Platform Length||43", 42" Usable|
|Maximum Travel Distance From the Ground||21"|
|Motor||Fully sealed 12 volt DC|
|Hitch Class3||Class II, III & IV|
Scooter lockdown arm
Power chair hold-down bar
Battery pack w/ charger
|Vehicle Platform||Full-size van, Minivan, Truck, Sedan, SUV and Crossover|
1 Does not include any accessories or hardware.
2 Lifting weight does not include accessories or certain upgraded seating. Please contact Customer Service for greater detail.
3 Hitch weight carrying capacity varies by vehicle. Call for details.
The newly redesigned Swing-Away Adaptor allows the Outlander Exterior Lift to effortlessly pivot away from a vehicle for even easier access to trunks, cargo spaces, lift gates or tailgates.
*Tested under ideal conditions using 325 lb. Scooter. Cycles per charge may vary depending on various factors such as scooter or power chair weight and climate.
NOTE: When used on an outside lift system, the weather covers must be secured not only with the drawstring, but also with a heavy gauge nylon cord threaded through the grommets and secured to the mobilitydevice. The drawstring closure should only be used by itself during stationary storage, such as on a porch or in a garage.
DISCLAIMER: Not all accessories are available for all products. Please speak with your Provider for details and availability.
Your Pride product has undergone thorough product testing to ensure safety, durability and performance.
Our power chairs, scooters and lift chairs are Food & Drug Administration (FDA) approved medical products that require specific testing prior to release for public use.
The testing requirements accepted by the FDA were developed by the American National Standards Institute/Rehabilitation Engineering & Assistive Technology Society of North America (ANSI/RESNA).
The tests are conducted in accordance with the requirements of the ANSI/RESNA Test Standards and complement an additional stringent testing regiment developed by Pride's Research & Development Team.
All products have passed, and in many cases, exceeded test criteria set forth, assuring the high level of quality synonymous with Pride.
Some of the items our testing criteria include are: