OUR BRANDS
Go Go Elite Traveller® 2 Platinum Specifications
FDA Class II Medical Device*| CATEGORY | SPECIFICATION |
|---|---|
| Model |
Go Go Elite Traveller® 2 Platinum (4-Wheel)
|
| Model Number |
SC442EMS
|
| Weight Capacity | 300 lbs. |
| Maximum Speed2 | Up to 4.23 mph |
| Ground Clearance4 | 1.34" at motor, 3.15" at mid-deck |
| Turning Radius4 | 37" |
| Overall Length4 | 39.37" |
| Overall Width4 | 19.45" |
| Seat-to-Deck Height | 16.38"-17.83" |
| Seat Height | 16.73" |
| Front Tires | 2" x 7" |
| Rear Tires | 2.5" x 8" |
| Range Per Charge2,3 | 12 Ah: Up to 6.6 miles at 300 lbs. Up to 8.8 miles at 220 lbs. 18 Ah: Up to 10.4 miles at 300 lbs. Up to 13.8 miles at 220 lbs. |
| Product Weight | 87 lbs. without batteries; 106.5 lbs. with 12 Ah batteries; 116.6 lbs. with 18 Ah batteries |
| Heaviest Piece when Disassembled4 | 39 lbs. (front section) |
| Standard Seating | Type: Mesh Back Material: Black Vinyl Dimensions: 17" x 17" Weight: 23 lbs. |
| Motor Output | Rear-wheel drive, sealed transaxle, 24-volt DC motor |
| Brakes | Regenerative and electromechanical |
| Battery Requirements5 | (Two) 12-volt, sealed lead-acid, non-spillable deep-cycle |
| Battery Weight | 12 Ah: 19.5 lbs. (standard) 18 Ah: 29.6 lbs. |
| Battery Charger | Off-board, 3.5 Amp |
| Warranty | Lifetime limited on frame; 2-year limited on Electronics; 2-year limited on Drivetrain |
| HCPCS Code Coverage | K0899 Power Mobility Device, not coded by DME PDAC. DME providers are responsible for determining appropriate billing codes when submitting for insurance reimbursement. HCPCS codes provided should not be considered as legal advice and not not guarantee reimbursement. Payer coding, coverage and bundling guidelines may apply. |
| The information contained herein is correct at the time of publication; we reserve the right to alter specifications without prior notice. 1 Pride® FDA Class II Medical Devices are designed to aid individuals with mobility impairments. 2 Varies with user weight, terrain type, battery amp-hour (AH), battery charge, battery condition and tire condition. These specifications can be subject to a variance of (+/- 10%). 3 Tested in accordance with ANSI/RESNA, WC Vol2, section 4 & ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Test conducted at maximum weight capacity. 4 Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of (+ or - 3%). 5 Battery weight may vary based on manufacturer. |
|