OUR BRANDS
Go Go® Ultra X Gen 3 Specifications
| CATEGORY | SPECIFICATION |
|---|---|
| Model |
Go Go® Ultra X Gen 3 (4-Wheel)
|
| Model Number |
SC493
|
| Weight Capacity | 300 lbs. |
| Maximum Speed2 | Up to 4.3 mph |
| Ground Clearance4 | 1.25" at motor |
| Turning Radius4 | 48.75" |
| Overall Length4 | 41.50" |
| Overall Width4 | 19.25" |
| Seat-to-Deck Range | 16.5"-18" |
| Seat-to-Ground Height Range | 20.75" – 20.25" |
| Front Tires | 2" x 7" solid |
| Rear Tires | 2" x 8" solid |
| Range Per Charge2,3 | 12 Ah: Up to 7.1 miles at 300 lbs. 12 Ah: Up to 8.9 miles at 220 lbs. |
Product Weight4
| 77.8 lbs. without batteries |
97.8 lbs. with 12 Ah batteries |
| Heaviest Piece when Disassembled4 | 36.2 lbs. (front) |
| Standard Seating | Type: Compact, Foldable Material: Black Vinyl Dimensions: 17 x 17 in. Weight: 23 lbs. |
| Motor Output | Rear-wheel drive, single motor, 24-volt DC motor |
| Brakes | Regenerative and electromechanical |
| Suspension | N/A |
| Battery Requirements5 | (Two) 12 Ah |
| Battery Weight5 | 12 Ah battery pack, 20 lbs. |
| Battery Charger | 2-amp off-board |
| Warranty | Lifetime limited on frame; 2-year limited on electronics; 2-year limited on drivetrain; 6-month limited on batteries |
| Color Option | Black |
| HCPCS Code Coverage1 | K0800 – Group 1 Standard. Pride® FDA Class II Medical Devices are designed to aid individuals with mobility impairments. HCPCS codes provided should not be considered as legal advice and do not guarantee reimbursement. DME providers are responsible for determining appropriate billing codes when submitting for insurance reimbursement. |
| The information contained herein is correct at the time of publication; we reserve the right to alter specifications without prior notice. |
|
|
1 Pride® FDA Class II Medical Devices are designed to aid individuals with mobility impairments. 2 Varies with user weight, terrain type, battery amp-hour rating (Ah), battery charge, battery condition, tire type and tire condition. This specification can be subject to a variance of +10%, -5%. 3 Tested in accordance with ANSI/RESNA, WC Vol2, section 4 & ISO 7176-4 standards. Results derived from theoretical calculations based on battery specifications and drive system performance. Test conducted at maximum weight capacity. 4 Due to manufacturing tolerances and continual product improvement, this specification can be subject to a variance of (+ or - 3%). 5 Battery weight may vary based on manufacturer. |
|